LED Flower Orange
Make a light up flower with a long tail LED then place it in a rotating vase.
VIDEO Orange Flower
Material
- Long Tail LED
- Wooden Bead
- CR2032 3V Button Cell Battery
- Conductive sticker dots
- Cellophane
- Tissue Paper
- Vase
- Rotating Stand
- Washi Tape
Instruction
- Take a long tail LED and thread the wires through a bead. This give more space to stick the decorations on.
- Select material to make the flower such as cellophane, tissue paper or crepe paper
- Cut the material to shape and wrap it around the LED wires and bead. Stick it on with Washi tape
- Add an extra layer of material and wrap the wires with Washi tape
- Use a conductive sticker dot to attach the end of the red wire to the positive side of the battery
- Use a conductive sticker dot to attach the end of the black wire to the negative side of the battery
- Cover the battery in Washi tape to provide insulation
- Place the flower in the rotating vase
Problem Solving
- Make sure that the positive side of the battery is connected to the red wire and the negative side is connected to the black wire
- Make sure that the conductive sticker dot does not reach over the edge of the battery or it will short circuit and not work
- Make sure that there is enough wire exposed to make a good connection with the battery
- Make sure that the batteries cannot touch each other in the vase or they will short circuit. Wrap the batteries and the exposed wire in washi tape for insulate